worship pads in mainstage.
MainStage can play WAV pads directly, no extra plug-ins needed. These are plain audio files, not MainStage patches, so you bring them in with the built-in Playback plug-in. Here are two setups: one pad per song, or one pad that carries across the whole set.
Exact menu wording varies between MainStage versions. The ideas are the same.
Setup A: one pad per song (simplest)
- In the song’s patch, add a new channel strip and choose Playback as its instrument.
- Drop the WAV for the song’s key onto the Playback plug-in.
- Turn loop on and switch tempo sync off, so the pad plays at its own pitch and length.
- Map Playback’s play/stop to a button on your controller (or a screen control), and the channel volume to a fader or expression pedal for fading.
Setup B: one pad strip for the whole set
If the pad cuts out every time you change patch, move it up a level. Put the Playback channel strip at the set level (or concert level), so it keeps playing while you move through the patches inside that set. Load the 12 keys into it, or keep one set per key. Changing songs then never interrupts the pad.
Fading between keys
Use two Playback strips (A and B). Start the new key on B while A is still playing, then bring B’s fader up and A’s down over a few seconds. With a mapped fader this is one hand movement.
Tips
- Minor song? Load the relative major (Em → G). Chart.
- Keep pads on their own output if your interface has spare channels, so front of house can ride them.
- Our files are long (10 minutes per key; Tōiri 5:41), so looping only matters for long ministry moments.
Try it now
Taiao is our free pad in all 12 keys. Tap a key to hear it, then grab the WAVs.